Photo Gallery

The Beast

Wrapped up this INVINCIBLE BOATS Center Console named “The Beast”. This boat came in with a custom dash that had failed after only a few months of use. We removed all the existing dash components and materials, redesigned, reinforced & reinstalled a new dash that will last for years to come. Complete with some Garmin Marine upgrades including a PS70 transducer. The new dash was cut on our THUNDER LASER Nova 51 machine. With any boat upgrade one of the most important items is selecting a qualified & experienced technician to perform the work. This makes the job go smoothly & the end result is always a positive experience. Staying on time and on budget takes the stress out of vessel upgrades. From engineering & design to troubleshooting & installation we can lend a helping hand to make the process as smooth as possible.

Two Garmin electronic displays installed on a vehicle dashboard, with visible reflections and a metal divider between them.

Interior view of a boat dashboard under construction with exposed wiring and ducts, featuring an opening for instruments and a compass on top.

Computer screen displaying a design in LightBurn software, featuring two adjacent rectangles and a circle. The interface shows various tools and settings for laser cutting.

Laser cutting machine with laptop displaying design software

Laser cutting machine with mesh bed and laptop on top.

Boat dashboard showing Garmin marine navigation screens with sonar and mapping technology, dock in background.

Boat dashboard with fishfinder screens showing sonar data and a person's hand pointing at one screen.

Boat dashboard with Garmin displays showing depth and sonar readings, steering wheel, and control panel.

Garmin fishfinder sonar display showing depth of 12.5 feet, with colored sonar readings indicating underwater structure and potential fish presence.

Garmin marine GPS display showing sonar fishfinder data with depth reading of 11.5 feet, located next to a mounted Icom marine radio.

Boat navigation system with Garmin display showing nautical chart, GPS data, water temperature, and depth readings. VHF marine radio visible on the left.

Boat sonar display showing depth and underwater readings

Boat navigation system showing marine map and sonar display with Garmin panels.

Boat dashboard with two Garmin sonar fishfinder displays and a person pointing at the screen.

Person on a boat pointing at navigation screens with marine chart and sonar display, overlooking a harbor with docks and water.

A motorboat docked at a marina, featuring tan and white seating and a canopy labeled Garmin. A person wearing a dark hoodie is seated at the controls. Other boats are visible in the background.

Friendship Yacht Daysailer 40’

Proper planning makes layout so much easier and takes it from a guessing game of will it fit to knowing it will work. We removed the old box. Took measurements of the space and then drew the new board in AutoCAD, placing our equipment and ensuring everything will fit. The next step was to take the design and make it a reality. Following the design as a template & making minor adjustments as needed. Next step is to install this on the Friendship Yacht Company Daysailer 40 & start connecting equipment

Electrical panel with switches and color-coded wiring in a mechanical room environment.

Electrical board with components including Victron Energy MultiPlus Compact inverter and Orion-Tr Smart charger.

Electrical panel with wires, fuses, and a blue Victron Energy Orion-Tr Smart 12/12-30 charger.

Laptop screen displaying a technical diagram of a DC distribution layout and battery switch panel in AutoCAD software.

Computer screen displaying an electrical schematic for a DC distribution layout and battery switch panel, opened in AutoCAD software.

An electrical panel featuring Victron Energy equipment, including a MultiPlus Compact inverter/charger and an Orion-Tr Smart DC/DC charger, surrounded by fuses and circuit breakers mounted on a board.

Engine Room Upgrade

Checkout this engine room. Triple Cummins diesel engines. This engine room had a single camera which just provided visible imaging. Here we have upgraded the camera with 3 Teledyne FLIR MTMS Cameras. The Marine Thermal Monitoring System provides you with visible, thermal or a mix ov thermal overlayed onto the visible. The system also has the ability to alert you if a designated area exceeds your temperature setting. This helps to ensure everything is operating normally within the engine space & any possible hazards are caught before becoming a more substantial issue. All that’s left with this one is to calibrate the cameras & adjust the color palette to the owners desire.

Thermal imaging screen displaying four sections of machinery with varying heat levels, labeled as "FWD Engine," "Port Engine," and "STBD Engine." Colors range from blue to red, indicating temperature differences.

A FLIR thermal camera installed near machinery in an industrial or mechanical setting, with pipes and a filter visible in the foreground and background.

Thermal camera and pipes in an industrial setting.

Wiring panel with FLIR device, Raymarine network switch, organized cables, and power connections

Thermal imaging display showing different engine sections labeled FWD Engine, Port Engine, and STBD Engine, with temperature readings in degrees Celsius by FLIR technology.

Electrical control panel with FLIR sensor and Blue Sea Systems fuse block

Engine room with Cummins marine engines and Fleetguard filters, featuring various pipes and electrical components.

Misc Photos

Boat navigation system display showing energy system overview, including battery status at 99%, solar power input of 3W, and DC load of 322W. Additional data such as boat speed, heading, and depth are also displayed on the right side of the screen.

Interior view of a boat cabin showing electrical wiring routed along wooden panels and metal surfaces. The wires are organized with clips and some are coiled. Yellow tape is used in spots. Visible are chunks of unpainted areas and a white storage cabinet.

Victron Energy Cerbo GX device with connected cables in an electrical setup

LCD screen showing an energy inverter's status with various power readings. "Shore Disconnected," "Solar yield 0W," "Alternator 2W," "Battery 98%," "AC Loads 0W," "DC Loads 231W," with "Inverting" mode active. Displayed in a Victron Energy control panel.

Electrical schematic diagram on a computer screen, showing wiring connections, components like batteries, chargers, and fuses, and labeled flows for an engine and thruster system. Includes software interface with tools and options visible.

Boat electrical panel with switches and multimeter

Electrical panel with wiring and components, mounted on a wooden board.

electrical circuit diagram showing connections and labels

Person climbing a ship's mast against a cloudy sky.

Close-up of a corroded metal light fixture with glass bulb outdoors

Close-up of a navigation light on a boat with red and green indicators, surrounded by metal railings."}

Copper pipe with sealant on a textured blue surface.

Close-up of a circular hole in a surface with rough, textured material and visible stone or rock pattern around it. Light shines through the hole, highlighting the interior and a tube or hose within.

Close-up of a circular area on a textured surface, possibly part of a vehicle's underside, with a stand in the background.

Boat dashboard with gauges and Garmin sonar display showing underwater topography.

Front view of a sailboat with anchor, ropes, and navigation lights at a dock.

Close-up of a brass fitting on a worn, textured metal surface.

Boat dashboard with steering wheel, gauges, Garmin GPS display, and control switches.

Boat dashboard with electronic displays and controls, including a Raymarine device, wood paneling, and a RAM mount.

Boat control panel displaying Garmin GPS, radar screen showing navigation data, speedometer, and compass.

Interior of a boat cabin with wood paneling, seating, multiple portholes, and a central pole. The area includes upholstered benches and a sleeping space with cushions.

Boat interior featuring a porthole window with metal frame, a wall-mounted light, and wooden cabinetry. A roll of paper towels is visible below.

Boat dashboard with navigation system and gauges

Boat dashboard with Garmin navigation system, traditional gauges, and cup holders.

Boat cockpit with two Garmin display screens, a steering wheel, and Mercury controls.

Blue diamond-patterned mat on the floor near a white wall with a round speaker, two circular vent covers, and a small shelf. Papers and cardboard are on the floor.

Close-up of a boat's control panel with a chrome steering wheel, Garmin display, speakers, and bow control buttons.

White circular speaker mounted on a wall, with a small rectangular panel above it.

Person using a cordless power drill with sanding attachment on a boat interior

A Fusion brand stereo system mounted on a wooden surface, displaying a track by Cage the Elephant via Bluetooth. Buttons for power, menu, play, and navigation are visible.

Wall-mounted Fusion audio amplifier with connected cables in a wooden compartment.

Garmin device displaying song "Back Against the Wall" by Cage the Elephant on Bluetooth mode, with control buttons.

Marine speaker by JL Audio mounted on a boat wall.

Boat control panel with Lumishore control, windlass switch, and voltage display.

Marine control panel with Lumishore interface displaying ‘This Zone is Off’ and a windlass switch.

Bottom of a boat hull showing two stern drives with propellers and an anode plate.

Stern of a boat showing propellers and hull with green tape markings; tools and equipment are visible.

Boat lighting control panel with Lumishore display for underwater lights, showing color palette and intensity settings, alongside a windlass control switch.

Lumishore control unit with cables connected, mounted on a textured wall.

Boat engine compartment with batteries and wiring, featuring a LiFePO4 battery.

Victron Energy Cerbo GX device installed in an electrical setup with various cables and connectors, including a Blue Sea Systems fuse block.

Electrical system setup featuring ZEUS high energy alternator regulator and Victron Energy MultiPlus-II inverter with wiring.

Lithium iron phosphate battery setup with cables and digital display

Victron Energy system display showing grid input at 1384W, solar yield at 0W, battery at 68% with 1020W charging power. Alternator power is not shown. AC loads are at 14W and DC loads at 128W. The system indicates bulk charging mode.

Electrical control panel with Victron Energy MultiPlus-II and Zeus voltage regulator, featuring red and yellow wiring connections.

Electrical setup with Victron Energy MultiPlus-II inverter and ARCO Zeus alternator regulator

Electrical panel with wires, a battery regulator labeled 'Zeus,' a Victron Energy Cerbo GX device, coolant reservoir for Westerbeke Diesel, and a MultiPlus charger.

FLIR camera installed in an industrial setting with surrounding pipes and cables.

Wooden control panel with gauges, switches, and buttons for a generator or marine equipment.

Marine navigation display with various icons for chart, echo, sidescan, downscan, radar, sail steer, race, instruments, video, time plot, wind plot, and Victron.

Battery and inverter installation with blue lithium batteries and red and yellow cables.

Battery system with red and yellow cables, a blue power inverter, and a fuse block, mounted on a wooden board.

Blue electronic device labeled "Cerbo GX" mounted on a wooden panel, surrounded by wires and cables, with a terminal strip nearby.

Close-up view of electrical connections with red-insulated wires and metal bolts in an industrial or automotive setting.

A battery bank setup with multiple blue batteries, red and yellow cables, and a blue charge controller in a wooden compartment.

Person operating a Thunder Laser machine in a workshop environment.

A Simrad marine radar screen displaying navigation information, including range, depth, and heading, with radar data and settings visible.

Simrad marine radar on boat deck, dockside harbor view, blue sky.

Marine depth finder on a boat displaying underwater measurements and sonar readings.

A Garmin fishfinder display on a boat showing sonar imaging and depth reading of 25.9 feet. The screen includes navigation data and a person's hand interacting with the display.